LED Parking Lot Light Installation Instruction
File size: 823.9KB
LED Parking Lot Light Installation
TYPE A ( Slip-fitter )
Step 1: Loosen the 4 screws on the lamp holder, connect the wires correctly and put the wires into the lamp pole, then lock the screws well to fix the lamp on the lamp pole.
Step 2: Loosen the locking bolt with tools, rotate the lamp and lock the screw after determining required angle.
Notice: Locking bolt can be only compatible with a lamp pole that the outer diameter is ￠60, lamp adjustable angle is 0-90°.
Copyright © 2022 Morstar All Right Reserved